Veröffentlichte Quellen
Quellen als ZIP herunterladen
CH-J Tools
Durchsuchen Sie Verzeichnisse und Dateien einer bestimmten Anwendungsausgabe.
CH-J / Server Manager
1704 Dateien
0.1.2-beta
Hinzugefügt: · Erstellt:
1
{2
"Boot partition of the disk that runs the system.": "運行系統所在磁碟的啓動分區。",3
"Reading partition tables, LVM and LUKS details and all changes need root rights.": "讀取分區表、LVM 和 LUKS 詳情及所有更改均需 root 權限。",4
"The sudo password was rejected.": "sudo 密碼被拒絕。",5
"Sessions cannot be loaded: {error}": "無法載入會話：{error}",6
"Select a session…": "選擇會話…",7
"No connected session": "沒有已連線的會話",8
"The SSH connection was lost. The view shows the last known state; it is refreshed after reconnecting.": "SSH 連線已中斷。視圖顯示最後已知狀態；重新連線後會刷新。",9
"Connect to a server over SSH in the Core first.": "請先在 Core 中通過 SSH 連線伺服器。",10
"Reconnected. Reading the current state…": "已重新連線。正在讀取當前狀態…",11
"Reading disks…": "正在讀取磁碟…",12
"Inventory loaded {time}.": "清單已於 {time} 載入。",13
"Read-only inventory without root: partition tables, LVM and LUKS details are partial. Use “Load with sudo” for full details and changes.": "無 root 權限的唯讀清單：分區表、LVM 和 LUKS 詳情不完整。使用“通過 sudo 載入”可獲取完整詳情並進行更改。",14
"Disks cannot be read: {error}": "無法讀取磁碟：{error}",15
"unformatted": "未格式化",16
"virtual disk": "虛擬磁碟",17
"loop device (image file)": "loop 設備（映像檔案）",18
"unknown": "未知",19
"Unsupported platform": "不支持的平台",20
"This server runs {os}. chj.disks manages Linux block devices only; no Linux disk tools were started on it and nothing was changed.": "此伺服器運行 {os}。chj.disks 僅管理 Linux 塊設備；未在其上啓動任何 Linux 磁碟工具，也未進行任何更改。",21
"full inventory (root)": "完整清單（root）",22
"read-only, partial": "唯讀、不完整",23
"system": "系統",24
"protected": "受保護",25
"No block devices found.": "未找到塊設備。",26
"contains the running system": "包含正在運行的系統",27
"Proxmox host storage — protected": "Proxmox 主機存儲 — 受保護",28
"read-only": "唯讀",29
"Model": "型號",30
"Serial / WWN": "序號 / WWN",31
"Partition table": "分區表",32
"partial, without root": "不完整，無 root 權限",33
"none": "無",34
"Sectors": "磁區",35
"logical": "邏輯",36
"physical": "物理",37
"Layers": "層級",38
"Image file": "映像檔案",39
"GPT": "GPT",40
"The backup GPT header is not at the end of the disk (the disk was enlarged). It is moved automatically before the new space is used.": "備份 GPT 頭不在磁碟末尾（磁碟已擴容）。使用新空間前會自動移動到末尾。",41
"MBR": "MBR",42
"MBR can address only the first 2 TiB of this disk.": "MBR 只能尋址此磁碟的前 2 TiB。",43
"Unallocated": "未分配",44
"unallocated": "未分配",45
"Drag to resize": "拖動以調整大小",46
"mounted": "已掛載",47
"active swap": "活動交換空間",48
"used by {detail}": "由 {detail} 使用",49
"ZFS pool {detail}": "ZFS 池 {detail}",50
"RAID member": "RAID 成員",51
"not in use": "未使用",52
"new": "新建",53
"thin pool": "精簡池",54
"thin volume (pool {pool})": "精簡卷（池 {pool}）",55
"snapshot": "快照",56
"Extend…": "擴展…",57
"Thin pools and thin volumes are shown read-only.": "精簡池和精簡卷僅以唯讀方式顯示。",58
"Reduce…": "縮減…",59
"XFS cannot be shrunk with the standard tools. Create a new, smaller file system and migrate the data.": "標準工具無法縮小 XFS。請新建較小的檔案系統並遷移資料。",60
"Advanced: only an unmounted ext file system.": "高級：僅限未掛載的 ext 檔案系統。",61
"Proxmox guest {id}": "Proxmox 客體 {id}",62
"{value} % data used": "已使用 {value} % 資料",63
"{value} % allocated": "已分配 {value} %",64
"inactive": "未啟用",65
"Found {free} of unallocated space. Partition {target} can be expanded.": "找到 {free} 未分配空間。分區 {target} 可擴容。",66
"The file system on {target} is {free} smaller than its device.": "{target} 上的檔案系統比其設備小 {free}。",67
"The LVM physical volume {target} can grow by {free}.": "LVM 實體磁碟區 {target} 可增加 {free}。",68
"Volume group free space ({free}) can extend {target}.": "磁碟區群群組可用空間（{free}）可用於擴展 {target}。",69
"Steps: {steps}": "步驟：{steps}",70
"If the running kernel does not accept the new partition size, the job stops and asks for a reboot.": "如果運行中的內核不接受新分區大小，任務會停止並要求重啓。",71
"Automatic expansion is not possible: {reason}": "無法自動擴容：{reason}",72
"Expand automatically": "自動擴容",73
"Unallocated space": "未分配空間",74
"Start sector": "起始磁區",75
"End sector": "結束磁區",76
"Size": "大小",77
"Note": "備注",78
"Partition planned in the queue.": "隊列中計劃創建的分區。",79
"Partition number": "分區編號",80
"Partition type": "分區類型",81
"PARTUUID": "PARTUUID",82
"Partition name": "分區名稱",83
"Flags": "標誌",84
"GPT attributes": "GPT 屬性",85
"File system": "檔案系統",86
"File system UUID": "檔案系統 UUID",87
"Label": "磁碟區標籤",88
"Version": "版本",89
"File system size": "檔案系統大小",90
"Mount points": "掛載點",91
"Usage": "使用情況",92
"mounted, df": "已掛載，df",93
"superblock": "超級塊",94
"Status": "狀態",95
"System roles": "系統角色",96
"LUKS": "LUKS",97
"Kernel": "內核",98
"The kernel uses a different size than the partition table (a reboot may be pending).": "內核使用的大小與分區表不同（可能需要重啓）。",99
"Kernel name": "內核名稱",100
"Type": "類型",101
"UUID": "UUID",102
"LVM": "LVM",103
"key location": "金鑰位置",104
"LVM PV": "LVM PV",105
"free": "可用",106
"Btrfs": "Btrfs",107
"allocated": "已分配",108
"ZFS pool": "ZFS 池",109
"Built from": "群組成設備",110
"Used by": "使用者",111
"Not available for this partition.": "此分區不可用。",112
"sfdisk is not installed on the server.": "伺服器未安裝 sfdisk。",113
"{fs} cannot be shrunk by CH-J.": "CH-J 無法縮小 {fs}。",114
"Mounted system file system: shrinking ext4 is possible only offline in a rescue/live system.": "已掛載的系統檔案系統：只能在救援/即時系統中離線縮小 ext4。",115
"Unmount the file system first (queue an unmount operation).": "請先卸載檔案系統（將卸載操作加入隊列）。",116
"Active swap is never disabled automatically.": "絕不會自動停用活動交換空間。",117
"The usage is unknown, so the safe minimum cannot be computed.": "使用量未知，無法計算安全最小值。",118
"{fs} cannot be resized by CH-J.": "CH-J 無法調整 {fs} 的大小。",119
"There is no unallocated space directly after the partition.": "分區後方沒有緊鄰的未分配空間。",120
"Read-only: the SSH account has no sudo rights.": "唯讀：SSH 帳號沒有 sudo 權限。",121
"New partition…": "新建分區…",122
"Details": "詳情",123
"Format…": "格式化…",124
"The device is in use.": "設備正在使用中。",125
"Resize…": "調整大小…",126
"Move / copy": "移動 / 複製",127
"Moving and copying partitions is prepared but not enabled until a reliable, tested mechanism exists.": "移動和複製分區的功能已準備，但在有可靠且經過測試的機制前不會啓用。",128
"Delete": "刪除",129
"Extended and logical MBR partitions are read-only.": "擴展和邏輯 MBR 分區為唯讀。",130
"Delete partition {path}? All data on it will be lost.": "要刪除分區 {path} 嗎？其中所有資料都將丟失。",131
"Check file system…": "檢查檔案系統…",132
"Checks run only on unmounted file systems.": "僅檢查未掛載的檔案系統。",133
"Not available for this content.": "不適用於此內容。",134
"Grow file system to fill the partition": "將檔案系統擴展至填滿分區",135
"The file system already fills the partition.": "檔案系統已填滿分區。",136
"Label…": "磁碟區標籤…",137
"Partition name…": "分區名稱…",138
"Partition names exist only in GPT.": "僅 GPT 支持分區名稱。",139
"Flags…": "標誌…",140
"Unmount": "卸載",141
"This mount point is needed by the running system; CH-J never unmounts it.": "運行中的系統需要此掛載點；CH-J 絕不會卸載它。",142
"Mount…": "掛載…",143
"No mountable file system.": "沒有可掛載的檔案系統。",144
"{tool} missing": "缺少 {tool}",145
"Add to queue": "加入隊列",146
"New size": "新大小",147
"Current layout": "當前佈局",148
"Resulting layout": "結果佈局",149
"{old} → {new}. Allowed: {min} – {max}.": "{old} → {new}。允許範圍：{min} – {max}。",150
"Use all adjacent free space": "使用全部相鄰可用空間",151
"Shrinking": "正在縮小",152
"Growing": "正在擴大",153
"XFS can only be grown (online, while mounted). Shrinking is not supported by the XFS tools.": "XFS 只能擴大（在線、已掛載時）。XFS 工具不支持縮小。",154
"ext4 grows online; it is shrunk only unmounted: check (e2fsck), minimum size with a safety reserve, shrink the file system, then the partition, then verify.": "ext4 可在線擴大；僅在未掛載時縮小：檢查（e2fsck）、計算含安全餘量的最小大小、先縮小檔案系統，再縮小分區，最後驗證。",155
"Resize {path}": "調整 {path} 的大小",156
"The size must be between {min} and {max}.": "大小必須介於 {min} 和 {max}。",157
"Unallocated space: {size} (sectors {start}–{end}).": "未分配空間：{size}（磁區 {start}–{end}）。",158
"Aligned to 1 MiB. The maximum uses the whole free area.": "按 1 MiB 對齊。最大值使用全部可用區域。",159
"Optional; A–Z, a–z, 0–9, dot, dash, underscore.": "可選；A–Z、a–z、0–9、點、連字元、下划線。",160
"Partition name (GPT)": "分區名稱（GPT）",161
"EFI system partition (FAT32 only)": "EFI 系統分區（僅 FAT32）",162
"New partition on {disk}": "在 {disk} 上新建分區",163
"Enter a valid size.": "請輸入有效大小。",164
"Format {path}": "格式化 {path}",165
"Formatting destroys all data on {path}.": "格式化將銷毀 {path} 上的所有資料。",166
"Check {path}": "檢查 {path}",167
"Read-only check (no changes)": "唯讀檢查（不作更改）",168
"Check and repair automatically safe problems": "檢查並自動修復可安全修復的問題",169
"btrfs check --repair is not offered: it can make damage worse.": "不提供 btrfs check --repair：它可能加重損壞。",170
"Label of {path}": "{path} 的磁碟區標籤",171
"Max. {limit} characters: A–Z, a–z, 0–9, dot, dash, underscore. Empty removes the label.": "最多 {limit} 個字元：A–Z、a–z、0–9、點、連字元、下划線。留空將移除磁碟區標籤。",172
"This file system must be unmounted to change its label.": "更改此檔案系統的磁碟區標籤前必須卸載。",173
"Partition name of {path}": "{path} 的分區名稱",174
"Empty removes the name.": "留空將移除名稱。",175
"Flags of {path}": "{path} 的標誌",176
"no type flag (Linux data)": "無類型標誌（Linux 資料）",177
"Type flags change the partition type GUID/ID; only one can be active. Partitions used by the running system keep their type.": "類型標誌會更改分區類型 GUID/ID；只能啓用一個。運行中系統使用的分區保留原類型。",178
"Nothing changed.": "沒有更改。",179
"Mount {path}": "掛載 {path}",180
"Mount point": "掛載點",181
"Below /mnt or /media. The mount is temporary; /etc/fstab is not changed.": "位於 /mnt 或 /media 下。掛載為臨時操作；不會更改 /etc/fstab。",182
"New partition table on {disk}": "在 {disk} 上新建分區表",183
"A new partition table removes ALL partitions and makes all data on {disk} inaccessible.": "新分區表將移除所有分區，並使 {disk} 上的所有資料無法訪問。",184
"MBR (dos) — max. 4 primary partitions, 2 TiB": "MBR（dos）— 最多 4 個主分區、2 TiB",185
"Extend {lv}": "擴展 {lv}",186
"Volume group {vg} has {free} free.": "磁碟區群群組 {vg} 有 {free} 可用空間。",187
"Use all free space of the volume group": "使用磁碟區群群組的全部可用空間",188
"New total size": "新的總大小",189
"The file system inside is grown in a separate step (ext4 online/offline, XFS and Btrfs online).": "內部檔案系統在單獨步驟中擴大（ext4 在線/離線，XFS 和 Btrfs 在線）。",190
"The new size must be larger than the current size.": "新大小必須大於當前大小。",191
"Reduce {lv} (advanced)": "縮減 {lv}（高級）",192
"Advanced operation: the ext file system is checked and shrunk first (minimum size plus reserve), then the logical volume is reduced. A wrong order or size destroys data; have a current backup.": "高級操作：先檢查並縮小 ext 檔案系統（最小大小加餘量），再縮減邏輯磁碟區。順序或大小錯誤會銷毀資料；請備好最新備份。",193
"Used: {used}": "已用：{used}",194
"I understand the risk and have a backup": "我瞭解風險並已備份",195
"Confirm the advanced operation.": "請確認此高級操作。",196
"The new size must be smaller than the current size.": "新大小必須小於當前大小。",197
"Validating the operation…": "正在驗證操作…",198
"Operation queued. Nothing has been changed on the server yet.": "操作已加入隊列。伺服器尚未發生更改。",199
"The queue no longer fits the current layout and was cleared: {error}": "隊列已不適用於當前佈局，現已清空：{error}",200
"maximum": "最大值",201
"New {type} partition table on {disk}": "在 {disk} 上新建 {type} 分區表",202
"New partition on {disk}: {size}, {fs}": "在 {disk} 上新建分區：{size}、{fs}",203
"Delete partition {number} of {disk}": "刪除 {disk} 的分區 {number}",204
"Resize partition {number} of {disk} to {size}": "將 {disk} 的分區 {number} 調整為 {size}",205
"Format {device} as {fs}": "將 {device} 格式化為 {fs}",206
"Label of {device}: {label}": "{device} 的磁碟區標籤：{label}",207
"Name of partition {number} of {disk}: {name}": "{disk} 的分區 {number} 名稱：{name}",208
"Flag {flag} of partition {number} of {disk}: {state}": "{disk} 的分區 {number} 的標誌 {flag}：{state}",209
"on": "開",210
"off": "關",211
"Grow the file system on {device}": "擴大 {device} 上的檔案系統",212
"Mount {device} at {mountpoint}": "將 {device} 掛載到 {mountpoint}",213
"Unmount {device}": "卸載 {device}",214
"Extend {lv} to {size}": "將 {lv} 擴展到 {size}",215
"Reduce {lv} to {size}": "將 {lv} 縮減到 {size}",216
"Resize physical volume {device}": "調整實體磁碟區 {device} 的大小",217
"Verify that {disk} still has the planned size and partition table": "驗證 {disk} 仍具有計劃的大小和分區表",218
"Verify the current size of {device}": "驗證 {device} 的當前大小",219
"Save the partition table metadata of {disk} on the server (this is not a data backup)": "將 {disk} 的分區表元資料保存到伺服器（這不是資料備份）",220
"Check that {device} is not in use": "檢查 {device} 未被使用",221
"Move the backup GPT header of {disk} to the end of the disk": "將 {disk} 的備份 GPT 頭移至磁碟末尾",222
"Write a new empty {type} partition table to {disk}": "向 {disk} 寫入新的空白 {type} 分區表",223
"Create partition {number} on {disk} ({size})": "在 {disk} 上創建分區 {number}（{size}）",224
"Delete partition {number} of {disk} ({size})": "刪除 {disk} 的分區 {number}（{size}）",225
"Move the end of partition {number} on {disk}: {old} → {new}": "移動 {disk} 上分區 {number} 的末尾：{old} → {new}",226
"Set the type of partition {number} on {disk} to {type}": "將 {disk} 上分區 {number} 的類型設為 {type}",227
"Set the name of partition {number} on {disk}": "設定 {disk} 上分區 {number} 的名稱",228
"Set the GPT attributes of partition {number} on {disk}": "設定 {disk} 上分區 {number} 的 GPT 屬性",229
"Set the boot flag on {disk}": "設定 {disk} 的啓動標誌",230
"Create {fs} on {device}": "在 {device} 上創建 {fs}",231
"Set the label of {device}": "設定 {device} 的磁碟區標籤",232
"Grow {fs} on {device} to the size of the device": "將 {device} 上的 {fs} 擴大至設備大小",233
"Check and shrink {fs} on {device} to {size}": "檢查並將 {device} 上的 {fs} 縮小到 {size}",234
"Resize the LUKS mapping {name}": "調整 LUKS 映射 {name} 的大小",235
"Resize the LVM physical volume {device}": "調整 LVM 實體磁碟區 {device} 的大小",236
"Extend the logical volume {lv}": "擴展邏輯磁碟區 {lv}",237
"Reduce the logical volume {lv} to {size}": "將邏輯磁碟區 {lv} 縮減到 {size}",238
"Verify the new geometry of partition {number} on {disk}": "驗證 {disk} 上分區 {number} 的新幾何佈局",239
"Verify the file system on {device}": "驗證 {device} 上的檔案系統",240
"Steps": "步驟",241
"changes data": "更改資料",242
"Risk of data loss: some steps delete, overwrite or shrink data. Make a separate backup or snapshot of the data first.": "資料丟失風險：部分步驟會刪除、覆蓋或縮小資料。請先為資料創建單獨備份或快照。",243
"The partition table metadata of {disks} is saved on the server before writing. This is not a backup of the data.": "寫入前會將 {disks} 的分區表元資料保存到伺服器。這不是資料備份。",244
"These file systems must stay unmounted during the job: {devices}.": "任務期間以下檔案系統必須保持未掛載：{devices}。",245
"A partition in use is changed. If the running kernel does not accept the new size, the job stops safely and asks for a reboot; it is never rebooted automatically.": "將更改正在使用的分區。如果運行中的內核不接受新大小，任務會安全停止並要求重啓；絕不會自動重啓。",246
"Volume group {vg} gains free space; extend a logical volume afterwards (no unique candidate).": "磁碟區群群組 {vg} 將獲得可用空間；之後請擴展邏輯磁碟區（沒有唯一候選項）。",247
"The LUKS container {device} is closed; the mapping uses the new size when it is opened next time.": "LUKS 容器 {device} 已關閉；下次打開時映射會使用新大小。",248
"The job runs on the server independently of this SSH connection. Once started it cannot be interrupted safely; it is never restarted automatically.": "任務在伺服器上獨立於此 SSH 連線運行。啓動後無法安全中斷；絕不會自動重新啓動。",249
"I have a current backup or snapshot of the affected data": "我已有受影響資料的最新備份或快照",250
"Confirm that a backup exists.": "請確認備份已存在。",251
"If the job was submitted before the connection dropped, it appears in “Jobs on server” after reconnecting; the plan is not started again.": "如果任務在連線中斷前已提交，重新連線後會出現在“伺服器任務”中；不會再次啓動該計劃。",252
"Re-reading the current layout and validating the plan…": "正在重新讀取當前佈局並驗證計劃…",253
"Re-reading the layout and planning the expansion…": "正在重新讀取佈局並規劃擴容…",254
"Monitoring the job needs the sudo password again.": "監控任務需要再次輸入 sudo 密碼。",255
"The disk job finished successfully.": "磁碟任務已成功完成。",256
"The job stopped: a reboot (or rescue system) is needed before the remaining steps.": "任務已停止：執行剩餘步驟前需要重啓（或使用救援系統）。",257
"The disk job did not finish successfully.": "磁碟任務未成功完成。",258
"Disk job": "磁碟任務",259
"Connection lost. The job continues on the server; the status is read again after reconnecting.": "連線已中斷。任務繼續在伺服器運行；重新連線後會再次讀取狀態。",260
"Running: step {step} of {total}": "正在運行：第 {step} 步，共 {total} 步",261
"Finished successfully and verified.": "已成功完成並驗證。",262
"Failed: {error}": "失敗：{error}",263
"Stopped: reboot required. {error}": "已停止：需要重啓。{error}",264
"Unknown: the runner is no longer active but did not record a result (e.g. server reboot). Check the disk manually; the job is never restarted automatically.": "未知：執行程序已不再運行，但沒有記錄結果（例如伺服器重啓）。請手動檢查磁碟；任務絕不會自動重啓。",265
"Disk jobs on this server": "此伺服器上的磁碟任務",266
"Job": "任務",267
"Operations": "操作",268
"Created": "創建時間",269
"Finished": "完成時間",270
"Show": "顯示",271
"No disk jobs were run on this server.": "此伺服器尚未運行磁碟任務。",272
"Job state and logs are kept on the server in /var/lib/chj-server-manager/disks (30 days).": "任務狀態和日誌保存在伺服器的 /var/lib/chj-server-manager/disks 中（30 天）。",273
"Reading health data…": "正在讀取健康資料…",274
"Health of {disk}": "{disk} 的健康狀況",275
"Overall assessment": "整體評估",276
"passed": "通過",277
"FAILED": "失敗",278
"Serial number": "序號",279
"Firmware": "韌體",280
"Capacity": "容量",281
"Temperature": "溫度",282
"Power-on hours": "通電小時數",283
"Power cycles": "通電次數",284
"Reallocated sectors": "重映射磁區",285
"Pending sectors": "待處理磁區",286
"Offline uncorrectable": "離線無法修正",287
"CRC errors": "CRC 錯誤",288
"NVMe percentage used": "NVMe 已用百分比",289
"Available spare": "可用備用空間",290
"Media errors": "介質錯誤",291
"Error log entries": "錯誤日誌條目",292
"SMART": "SMART",293
"smartctl (smartmontools) is not installed. CH-J does not install packages.": "未安裝 smartctl（smartmontools）。CH-J 不會安裝套件。",294
"Not available for this device (common for virtual disks): {reason}": "此設備不可用（常見於虛擬磁碟）：{reason}",295
"Queue cleared; nothing was changed on the server.": "隊列已清空；伺服器未發生更改。",296
"Check and repair {device}": "檢查並修復 {device}",297
"Check {device} (read-only)": "檢查 {device}（唯讀）",298
"Check and repair the file system on {device}": "檢查並修復 {device} 上的檔案系統",299
"Check the file system on {device} (read-only)": "檢查 {device} 上的檔案系統（唯讀）",300
"The SSH account has no sudo rights; disks are shown read-only.": "SSH 帳號沒有 sudo 權限；磁碟以唯讀方式顯示。",301
"The sudo policy requires a terminal (requiretty); CH-J does not bypass it.": "sudo 策略要求終端（requiretty）；CH-J 不會繞過此要求。",302
"sudo is not installed and the SSH account is not root.": "未安裝 sudo，且 SSH 帳號不是 root。",303
"The SSH connection was lost. A running disk job continues on the server; its status is checked again after reconnecting.": "SSH 連線已中斷。運行中的磁碟任務會繼續在伺服器執行；重新連線後再次檢查狀態。",304
"The server did not respond in time.": "伺服器未及時回應。",305
"The disk layout changed since the plan was reviewed. Nothing was changed; review the new plan.": "自審核計劃後磁碟佈局已更改。未作任何更改；請審核新計劃。",306
"The plan expired or was already used. Nothing was changed.": "計劃已過期或已使用。未作任何更改。",307
"The disk layout changed since planning; the job stopped before changing anything.": "自制定計劃後磁碟佈局已更改；任務在任何更改前已停止。",308
"Another disk job is running on this server.": "此伺服器上有另一個磁碟任務正在運行。",309
"This job was already submitted; its status is shown instead.": "此任務已提交；改為顯示其狀態。",310
"This device belongs to Proxmox host or guest storage; destructive changes are not offered.": "此設備屬於 Proxmox 主機或客體存儲；不提供破壞性更改。",311
"The device is in use (mounted, active swap or used by another layer). CH-J never releases it automatically.": "設備正在使用中（已掛載、活動交換空間或被其他層使用）。CH-J 絕不會自動釋放它。",312
"Shrinking needs an unmounted file system.": "縮小需要未掛載的檔案系統。",313
"XFS can only be grown while mounted.": "XFS 只能在已掛載時擴大。",314
"Resizing FAT is not implemented.": "尚未實現 FAT 大小調整。",315
"Resizing this LUKS mapping needs its passphrase; CH-J never handles LUKS secrets.": "調整此 LUKS 映射大小需要其通關片語；CH-J 絕不處理 LUKS 機密。",316
"LUKS is never shrunk automatically.": "絕不會自動縮小 LUKS。",317
"A required tool is not installed on the server. CH-J does not install packages.": "伺服器未安裝所需工具。CH-J 不會安裝套件。",318
"The size is below the safe minimum.": "大小低於安全最小值。",319
"This operation is prepared but not enabled yet.": "此操作已準備，但尚未啓用。",320
"The kernel still uses the old partition table. Reboot (or finish in a rescue system) before continuing.": "內核仍使用舊分區表。繼續前請重啓（或在救援系統中完成）。",321
"This needs root or sudo.": "需要 root 或 sudo。",322
"Disk management is available only for Linux servers.": "磁碟管理僅適用於 Linux 伺服器。",323
"The expansion is no longer possible with the current layout.": "當前佈局已無法執行擴容。",324
"Disk Manager": "Disk Manager",325
"Close": "關閉",326
"Active SSH session": "當前 SSH 會話",327
"Refresh": "刷新",328
"Load with sudo": "通過 sudo 載入",329
"Jobs on server": "伺服器任務",330
"Devices": "設備",331
"Health (SMART)": "健康狀況（SMART）",332
"New partition table…": "新建分區表…",333
"Preview of queued changes": "隊列更改預覽",334
"Partition": "分區",335
"Label / name": "磁碟區標籤 / 名稱",336
"Used": "已用",337
"Unused": "未用",338
"LVM volume groups": "LVM 磁碟區群群組",339
"Volume group / logical volume": "磁碟區群群組 / 邏輯磁碟區",340
"Free / data": "可用 / 資料",341
"Content": "內容",342
"Pending operations": "待處理操作",343
"Review and apply…": "審核並應用…",344
"Undo last": "撤銷上一步",345
"Clear queue": "清空隊列",346
"Clearing the queue changes nothing on the server.": "清空隊列不會更改伺服器上的任何內容。",347
"Hide": "隱藏",348
"Detailed log": "詳細日誌",349
"Restricted capabilities": "受限功能",350
"The plugin has no access to Node.js, local files or the network. It reads disks through disks.read and changes them only through fixed, validated Core operations (disks.manage); there is no generic shell.": "此模塊無法訪問 Node.js、本地檔案或網路。它通過 disks.read 讀取磁碟，僅通過固定、已驗證的 Core 操作（disks.manage）進行更改；沒有通用 shell。",351
"Cancel": "取消",352
"Review planned changes": "審核計劃更改",353
"Back without changes": "返回且不作更改",354
"Apply now": "立即應用",355
"sudo required": "需要 sudo",356
"sudo password": "sudo 密碼",357
"Keep in memory for this SSH session (needed to monitor running jobs; cleared on disconnect or after 10 minutes of inactivity)": "在此 SSH 會話期間保存在記憶體中（監控任務所需；斷開連線或閒置 10 分鐘後清除）",358
"The password is sent to the server only through the SSH channel's stdin and is never stored on disk or logged.": "密碼僅通過 SSH 通道的 stdin 發送至伺服器，絕不保存在磁碟或日誌中。",359
"Continue": "繼續",360
"Unknown": "未知",361
"done": "已完成",362
"running": "運行中",363
"failed": "失敗",364
"stopped": "已停止",365
"succeeded": "成功",366
"pending-reboot": "等待重啓",367
"Session ended. Choose a server.": "工作階段已結束。請選擇伺服器。"368
}SHA-256
7820ea67cb38f74ddc493df41639e6bbd7fa8e62a713e164c96548641f85de5dCH-J Proprietary Software License 1.14 · Die Quellen werden unter der CH-J Proprietary Software License 1.14 bereitgestellt. Ihre Verfügbarkeit ändert die Lizenzbedingungen nicht und gewährt keine zusätzlichen Rechte.
SHA-256 des Archivs
ac8fe790f4ba60fc098f8c985fc2656cfcc6cdc21fb34b30e308a2b54e62258f