Veröffentlichte Quellen
Quellen als ZIP herunterladen
CH-J Tools
Durchsuchen Sie Verzeichnisse und Dateien einer bestimmten Anwendungsausgabe.
CH-J / Server Manager
872 Dateien
core-20261030T220507Z-61e4558d889f
Hinzugefügt: · Erstellt:
1
{2
"Boot partition of the disk that runs the system.": "运行系统所在磁盘的启动分区。",3
"Reading partition tables, LVM and LUKS details and all changes need root rights.": "读取分区表、LVM 和 LUKS 详情及所有更改均需 root 权限。",4
"The sudo password was rejected.": "sudo 密码被拒绝。",5
"Sessions cannot be loaded: {error}": "无法加载会话：{error}",6
"Select a session…": "选择会话…",7
"No connected session": "没有已连接的会话",8
"The SSH connection was lost. The view shows the last known state; it is refreshed after reconnecting.": "SSH 连接已中断。视图显示最后已知状态；重新连接后会刷新。",9
"Connect to a server over SSH in the Core first.": "请先在 Core 中通过 SSH 连接服务器。",10
"Reconnected. Reading the current state…": "已重新连接。正在读取当前状态…",11
"Reading disks…": "正在读取磁盘…",12
"Inventory loaded {time}.": "清单已于 {time} 加载。",13
"Read-only inventory without root: partition tables, LVM and LUKS details are partial. Use “Load with sudo” for full details and changes.": "无 root 权限的只读清单：分区表、LVM 和 LUKS 详情不完整。使用“通过 sudo 加载”可获取完整详情并进行更改。",14
"Disks cannot be read: {error}": "无法读取磁盘：{error}",15
"unformatted": "未格式化",16
"virtual disk": "虚拟磁盘",17
"loop device (image file)": "loop 设备（映像文件）",18
"unknown": "未知",19
"Unsupported platform": "不支持的平台",20
"This server runs {os}. chj.disks manages Linux block devices only; no Linux disk tools were started on it and nothing was changed.": "此服务器运行 {os}。chj.disks 仅管理 Linux 块设备；未在其上启动任何 Linux 磁盘工具，也未进行任何更改。",21
"full inventory (root)": "完整清单（root）",22
"read-only, partial": "只读、不完整",23
"system": "系统",24
"protected": "受保护",25
"No block devices found.": "未找到块设备。",26
"contains the running system": "包含正在运行的系统",27
"Proxmox host storage — protected": "Proxmox 主机存储 — 受保护",28
"read-only": "只读",29
"Model": "型号",30
"Serial / WWN": "序列号 / WWN",31
"Partition table": "分区表",32
"partial, without root": "不完整，无 root 权限",33
"none": "无",34
"Sectors": "扇区",35
"logical": "逻辑",36
"physical": "物理",37
"Layers": "层级",38
"Image file": "映像文件",39
"GPT": "GPT",40
"The backup GPT header is not at the end of the disk (the disk was enlarged). It is moved automatically before the new space is used.": "备份 GPT 头不在磁盘末尾（磁盘已扩容）。使用新空间前会自动移动到末尾。",41
"MBR": "MBR",42
"MBR can address only the first 2 TiB of this disk.": "MBR 只能寻址此磁盘的前 2 TiB。",43
"Unallocated": "未分配",44
"unallocated": "未分配",45
"Drag to resize": "拖动以调整大小",46
"mounted": "已挂载",47
"active swap": "活动交换空间",48
"used by {detail}": "由 {detail} 使用",49
"ZFS pool {detail}": "ZFS 池 {detail}",50
"RAID member": "RAID 成员",51
"not in use": "未使用",52
"new": "新建",53
"thin pool": "精简池",54
"thin volume (pool {pool})": "精简卷（池 {pool}）",55
"snapshot": "快照",56
"Extend…": "扩展…",57
"Thin pools and thin volumes are shown read-only.": "精简池和精简卷仅以只读方式显示。",58
"Reduce…": "缩减…",59
"XFS cannot be shrunk with the standard tools. Create a new, smaller file system and migrate the data.": "标准工具无法缩小 XFS。请新建较小的文件系统并迁移数据。",60
"Advanced: only an unmounted ext file system.": "高级：仅限未挂载的 ext 文件系统。",61
"Proxmox guest {id}": "Proxmox 客户机 {id}",62
"{value} % data used": "已使用 {value} % 数据",63
"{value} % allocated": "已分配 {value} %",64
"inactive": "未激活",65
"Found {free} of unallocated space. Partition {target} can be expanded.": "找到 {free} 未分配空间。分区 {target} 可扩容。",66
"The file system on {target} is {free} smaller than its device.": "{target} 上的文件系统比其设备小 {free}。",67
"The LVM physical volume {target} can grow by {free}.": "LVM 物理卷 {target} 可增加 {free}。",68
"Volume group free space ({free}) can extend {target}.": "卷组空闲空间（{free}）可用于扩展 {target}。",69
"Steps: {steps}": "步骤：{steps}",70
"If the running kernel does not accept the new partition size, the job stops and asks for a reboot.": "如果运行中的内核不接受新分区大小，任务会停止并要求重启。",71
"Automatic expansion is not possible: {reason}": "无法自动扩容：{reason}",72
"Expand automatically": "自动扩容",73
"Unallocated space": "未分配空间",74
"Start sector": "起始扇区",75
"End sector": "结束扇区",76
"Size": "大小",77
"Note": "备注",78
"Partition planned in the queue.": "队列中计划创建的分区。",79
"Partition number": "分区编号",80
"Partition type": "分区类型",81
"PARTUUID": "PARTUUID",82
"Partition name": "分区名称",83
"Flags": "标志",84
"GPT attributes": "GPT 属性",85
"File system": "文件系统",86
"File system UUID": "文件系统 UUID",87
"Label": "卷标",88
"Version": "版本",89
"File system size": "文件系统大小",90
"Mount points": "挂载点",91
"Usage": "使用情况",92
"mounted, df": "已挂载，df",93
"superblock": "超级块",94
"Status": "状态",95
"System roles": "系统角色",96
"LUKS": "LUKS",97
"Kernel": "内核",98
"The kernel uses a different size than the partition table (a reboot may be pending).": "内核使用的大小与分区表不同（可能需要重启）。",99
"Kernel name": "内核名称",100
"Type": "类型",101
"UUID": "UUID",102
"LVM": "LVM",103
"key location": "密钥位置",104
"LVM PV": "LVM PV",105
"free": "空闲",106
"Btrfs": "Btrfs",107
"allocated": "已分配",108
"ZFS pool": "ZFS 池",109
"Built from": "组成设备",110
"Used by": "使用者",111
"Not available for this partition.": "此分区不可用。",112
"sfdisk is not installed on the server.": "服务器未安装 sfdisk。",113
"{fs} cannot be shrunk by CH-J.": "CH-J 无法缩小 {fs}。",114
"Mounted system file system: shrinking ext4 is possible only offline in a rescue/live system.": "已挂载的系统文件系统：只能在救援/实时系统中离线缩小 ext4。",115
"Unmount the file system first (queue an unmount operation).": "请先卸载文件系统（将卸载操作加入队列）。",116
"Active swap is never disabled automatically.": "绝不会自动禁用活动交换空间。",117
"The usage is unknown, so the safe minimum cannot be computed.": "使用量未知，无法计算安全最小值。",118
"{fs} cannot be resized by CH-J.": "CH-J 无法调整 {fs} 的大小。",119
"There is no unallocated space directly after the partition.": "分区后方没有紧邻的未分配空间。",120
"Read-only: the SSH account has no sudo rights.": "只读：SSH 账户没有 sudo 权限。",121
"New partition…": "新建分区…",122
"Details": "详情",123
"Format…": "格式化…",124
"The device is in use.": "设备正在使用中。",125
"Resize…": "调整大小…",126
"Move / copy": "移动 / 复制",127
"Moving and copying partitions is prepared but not enabled until a reliable, tested mechanism exists.": "移动和复制分区的功能已准备，但在有可靠且经过测试的机制前不会启用。",128
"Delete": "删除",129
"Extended and logical MBR partitions are read-only.": "扩展和逻辑 MBR 分区为只读。",130
"Delete partition {path}? All data on it will be lost.": "要删除分区 {path} 吗？其中所有数据都将丢失。",131
"Check file system…": "检查文件系统…",132
"Checks run only on unmounted file systems.": "仅检查未挂载的文件系统。",133
"Not available for this content.": "不适用于此内容。",134
"Grow file system to fill the partition": "将文件系统扩展至填满分区",135
"The file system already fills the partition.": "文件系统已填满分区。",136
"Label…": "卷标…",137
"Partition name…": "分区名称…",138
"Partition names exist only in GPT.": "仅 GPT 支持分区名称。",139
"Flags…": "标志…",140
"Unmount": "卸载",141
"This mount point is needed by the running system; CH-J never unmounts it.": "运行中的系统需要此挂载点；CH-J 绝不会卸载它。",142
"Mount…": "挂载…",143
"No mountable file system.": "没有可挂载的文件系统。",144
"{tool} missing": "缺少 {tool}",145
"Add to queue": "加入队列",146
"New size": "新大小",147
"Current layout": "当前布局",148
"Resulting layout": "结果布局",149
"{old} → {new}. Allowed: {min} – {max}.": "{old} → {new}。允许范围：{min} – {max}。",150
"Use all adjacent free space": "使用全部相邻空闲空间",151
"Shrinking": "正在缩小",152
"Growing": "正在扩大",153
"XFS can only be grown (online, while mounted). Shrinking is not supported by the XFS tools.": "XFS 只能扩大（在线、已挂载时）。XFS 工具不支持缩小。",154
"ext4 grows online; it is shrunk only unmounted: check (e2fsck), minimum size with a safety reserve, shrink the file system, then the partition, then verify.": "ext4 可在线扩大；仅在未挂载时缩小：检查（e2fsck）、计算含安全余量的最小大小、先缩小文件系统，再缩小分区，最后验证。",155
"Resize {path}": "调整 {path} 的大小",156
"The size must be between {min} and {max}.": "大小必须介于 {min} 和 {max}。",157
"Unallocated space: {size} (sectors {start}–{end}).": "未分配空间：{size}（扇区 {start}–{end}）。",158
"Aligned to 1 MiB. The maximum uses the whole free area.": "按 1 MiB 对齐。最大值使用全部空闲区域。",159
"Optional; A–Z, a–z, 0–9, dot, dash, underscore.": "可选；A–Z、a–z、0–9、点、连字符、下划线。",160
"Partition name (GPT)": "分区名称（GPT）",161
"EFI system partition (FAT32 only)": "EFI 系统分区（仅 FAT32）",162
"New partition on {disk}": "在 {disk} 上新建分区",163
"Enter a valid size.": "请输入有效大小。",164
"Format {path}": "格式化 {path}",165
"Formatting destroys all data on {path}.": "格式化将销毁 {path} 上的所有数据。",166
"Check {path}": "检查 {path}",167
"Read-only check (no changes)": "只读检查（不作更改）",168
"Check and repair automatically safe problems": "检查并自动修复可安全修复的问题",169
"btrfs check --repair is not offered: it can make damage worse.": "不提供 btrfs check --repair：它可能加重损坏。",170
"Label of {path}": "{path} 的卷标",171
"Max. {limit} characters: A–Z, a–z, 0–9, dot, dash, underscore. Empty removes the label.": "最多 {limit} 个字符：A–Z、a–z、0–9、点、连字符、下划线。留空将移除卷标。",172
"This file system must be unmounted to change its label.": "更改此文件系统的卷标前必须卸载。",173
"Partition name of {path}": "{path} 的分区名称",174
"Empty removes the name.": "留空将移除名称。",175
"Flags of {path}": "{path} 的标志",176
"no type flag (Linux data)": "无类型标志（Linux 数据）",177
"Type flags change the partition type GUID/ID; only one can be active. Partitions used by the running system keep their type.": "类型标志会更改分区类型 GUID/ID；只能启用一个。运行中系统使用的分区保留原类型。",178
"Nothing changed.": "没有更改。",179
"Mount {path}": "挂载 {path}",180
"Mount point": "挂载点",181
"Below /mnt or /media. The mount is temporary; /etc/fstab is not changed.": "位于 /mnt 或 /media 下。挂载为临时操作；不会更改 /etc/fstab。",182
"New partition table on {disk}": "在 {disk} 上新建分区表",183
"A new partition table removes ALL partitions and makes all data on {disk} inaccessible.": "新分区表将移除所有分区，并使 {disk} 上的所有数据无法访问。",184
"MBR (dos) — max. 4 primary partitions, 2 TiB": "MBR（dos）— 最多 4 个主分区、2 TiB",185
"Extend {lv}": "扩展 {lv}",186
"Volume group {vg} has {free} free.": "卷组 {vg} 有 {free} 空闲空间。",187
"Use all free space of the volume group": "使用卷组的全部空闲空间",188
"New total size": "新的总大小",189
"The file system inside is grown in a separate step (ext4 online/offline, XFS and Btrfs online).": "内部文件系统在单独步骤中扩大（ext4 在线/离线，XFS 和 Btrfs 在线）。",190
"The new size must be larger than the current size.": "新大小必须大于当前大小。",191
"Reduce {lv} (advanced)": "缩减 {lv}（高级）",192
"Advanced operation: the ext file system is checked and shrunk first (minimum size plus reserve), then the logical volume is reduced. A wrong order or size destroys data; have a current backup.": "高级操作：先检查并缩小 ext 文件系统（最小大小加余量），再缩减逻辑卷。顺序或大小错误会销毁数据；请备好最新备份。",193
"Used: {used}": "已用：{used}",194
"I understand the risk and have a backup": "我了解风险并已备份",195
"Confirm the advanced operation.": "请确认此高级操作。",196
"The new size must be smaller than the current size.": "新大小必须小于当前大小。",197
"Validating the operation…": "正在验证操作…",198
"Operation queued. Nothing has been changed on the server yet.": "操作已加入队列。服务器尚未发生更改。",199
"The queue no longer fits the current layout and was cleared: {error}": "队列已不适用于当前布局，现已清空：{error}",200
"maximum": "最大值",201
"New {type} partition table on {disk}": "在 {disk} 上新建 {type} 分区表",202
"New partition on {disk}: {size}, {fs}": "在 {disk} 上新建分区：{size}、{fs}",203
"Delete partition {number} of {disk}": "删除 {disk} 的分区 {number}",204
"Resize partition {number} of {disk} to {size}": "将 {disk} 的分区 {number} 调整为 {size}",205
"Format {device} as {fs}": "将 {device} 格式化为 {fs}",206
"Label of {device}: {label}": "{device} 的卷标：{label}",207
"Name of partition {number} of {disk}: {name}": "{disk} 的分区 {number} 名称：{name}",208
"Flag {flag} of partition {number} of {disk}: {state}": "{disk} 的分区 {number} 的标志 {flag}：{state}",209
"on": "开",210
"off": "关",211
"Grow the file system on {device}": "扩大 {device} 上的文件系统",212
"Mount {device} at {mountpoint}": "将 {device} 挂载到 {mountpoint}",213
"Unmount {device}": "卸载 {device}",214
"Extend {lv} to {size}": "将 {lv} 扩展到 {size}",215
"Reduce {lv} to {size}": "将 {lv} 缩减到 {size}",216
"Resize physical volume {device}": "调整物理卷 {device} 的大小",217
"Verify that {disk} still has the planned size and partition table": "验证 {disk} 仍具有计划的大小和分区表",218
"Verify the current size of {device}": "验证 {device} 的当前大小",219
"Save the partition table metadata of {disk} on the server (this is not a data backup)": "将 {disk} 的分区表元数据保存到服务器（这不是数据备份）",220
"Check that {device} is not in use": "检查 {device} 未被使用",221
"Move the backup GPT header of {disk} to the end of the disk": "将 {disk} 的备份 GPT 头移至磁盘末尾",222
"Write a new empty {type} partition table to {disk}": "向 {disk} 写入新的空白 {type} 分区表",223
"Create partition {number} on {disk} ({size})": "在 {disk} 上创建分区 {number}（{size}）",224
"Delete partition {number} of {disk} ({size})": "删除 {disk} 的分区 {number}（{size}）",225
"Move the end of partition {number} on {disk}: {old} → {new}": "移动 {disk} 上分区 {number} 的末尾：{old} → {new}",226
"Set the type of partition {number} on {disk} to {type}": "将 {disk} 上分区 {number} 的类型设为 {type}",227
"Set the name of partition {number} on {disk}": "设置 {disk} 上分区 {number} 的名称",228
"Set the GPT attributes of partition {number} on {disk}": "设置 {disk} 上分区 {number} 的 GPT 属性",229
"Set the boot flag on {disk}": "设置 {disk} 的启动标志",230
"Create {fs} on {device}": "在 {device} 上创建 {fs}",231
"Set the label of {device}": "设置 {device} 的卷标",232
"Grow {fs} on {device} to the size of the device": "将 {device} 上的 {fs} 扩大至设备大小",233
"Check and shrink {fs} on {device} to {size}": "检查并将 {device} 上的 {fs} 缩小到 {size}",234
"Resize the LUKS mapping {name}": "调整 LUKS 映射 {name} 的大小",235
"Resize the LVM physical volume {device}": "调整 LVM 物理卷 {device} 的大小",236
"Extend the logical volume {lv}": "扩展逻辑卷 {lv}",237
"Reduce the logical volume {lv} to {size}": "将逻辑卷 {lv} 缩减到 {size}",238
"Verify the new geometry of partition {number} on {disk}": "验证 {disk} 上分区 {number} 的新几何布局",239
"Verify the file system on {device}": "验证 {device} 上的文件系统",240
"Steps": "步骤",241
"changes data": "更改数据",242
"Risk of data loss: some steps delete, overwrite or shrink data. Make a separate backup or snapshot of the data first.": "数据丢失风险：部分步骤会删除、覆盖或缩小数据。请先为数据创建单独备份或快照。",243
"The partition table metadata of {disks} is saved on the server before writing. This is not a backup of the data.": "写入前会将 {disks} 的分区表元数据保存到服务器。这不是数据备份。",244
"These file systems must stay unmounted during the job: {devices}.": "任务期间以下文件系统必须保持未挂载：{devices}。",245
"A partition in use is changed. If the running kernel does not accept the new size, the job stops safely and asks for a reboot; it is never rebooted automatically.": "将更改正在使用的分区。如果运行中的内核不接受新大小，任务会安全停止并要求重启；绝不会自动重启。",246
"Volume group {vg} gains free space; extend a logical volume afterwards (no unique candidate).": "卷组 {vg} 将获得空闲空间；之后请扩展逻辑卷（没有唯一候选项）。",247
"The LUKS container {device} is closed; the mapping uses the new size when it is opened next time.": "LUKS 容器 {device} 已关闭；下次打开时映射会使用新大小。",248
"The job runs on the server independently of this SSH connection. Once started it cannot be interrupted safely; it is never restarted automatically.": "任务在服务器上独立于此 SSH 连接运行。启动后无法安全中断；绝不会自动重新启动。",249
"I have a current backup or snapshot of the affected data": "我已有受影响数据的最新备份或快照",250
"Confirm that a backup exists.": "请确认备份已存在。",251
"If the job was submitted before the connection dropped, it appears in “Jobs on server” after reconnecting; the plan is not started again.": "如果任务在连接中断前已提交，重新连接后会出现在“服务器任务”中；不会再次启动该计划。",252
"Re-reading the current layout and validating the plan…": "正在重新读取当前布局并验证计划…",253
"Re-reading the layout and planning the expansion…": "正在重新读取布局并规划扩容…",254
"Monitoring the job needs the sudo password again.": "监控任务需要再次输入 sudo 密码。",255
"The disk job finished successfully.": "磁盘任务已成功完成。",256
"The job stopped: a reboot (or rescue system) is needed before the remaining steps.": "任务已停止：执行剩余步骤前需要重启（或使用救援系统）。",257
"The disk job did not finish successfully.": "磁盘任务未成功完成。",258
"Disk job": "磁盘任务",259
"Connection lost. The job continues on the server; the status is read again after reconnecting.": "连接已中断。任务继续在服务器运行；重新连接后会再次读取状态。",260
"Running: step {step} of {total}": "正在运行：第 {step} 步，共 {total} 步",261
"Finished successfully and verified.": "已成功完成并验证。",262
"Failed: {error}": "失败：{error}",263
"Stopped: reboot required. {error}": "已停止：需要重启。{error}",264
"Unknown: the runner is no longer active but did not record a result (e.g. server reboot). Check the disk manually; the job is never restarted automatically.": "未知：执行程序已不再运行，但没有记录结果（例如服务器重启）。请手动检查磁盘；任务绝不会自动重启。",265
"Disk jobs on this server": "此服务器上的磁盘任务",266
"Job": "任务",267
"Operations": "操作",268
"Created": "创建时间",269
"Finished": "完成时间",270
"Show": "显示",271
"No disk jobs were run on this server.": "此服务器尚未运行磁盘任务。",272
"Job state and logs are kept on the server in /var/lib/chj-server-manager/disks (30 days).": "任务状态和日志保存在服务器的 /var/lib/chj-server-manager/disks 中（30 天）。",273
"Reading health data…": "正在读取健康数据…",274
"Health of {disk}": "{disk} 的健康状况",275
"Overall assessment": "总体评估",276
"passed": "通过",277
"FAILED": "失败",278
"Serial number": "序列号",279
"Firmware": "固件",280
"Capacity": "容量",281
"Temperature": "温度",282
"Power-on hours": "通电小时数",283
"Power cycles": "通电次数",284
"Reallocated sectors": "重映射扇区",285
"Pending sectors": "待处理扇区",286
"Offline uncorrectable": "离线无法修正",287
"CRC errors": "CRC 错误",288
"NVMe percentage used": "NVMe 已用百分比",289
"Available spare": "可用备用空间",290
"Media errors": "介质错误",291
"Error log entries": "错误日志条目",292
"SMART": "SMART",293
"smartctl (smartmontools) is not installed. CH-J does not install packages.": "未安装 smartctl（smartmontools）。CH-J 不会安装软件包。",294
"Not available for this device (common for virtual disks): {reason}": "此设备不可用（常见于虚拟磁盘）：{reason}",295
"Queue cleared; nothing was changed on the server.": "队列已清空；服务器未发生更改。",296
"Check and repair {device}": "检查并修复 {device}",297
"Check {device} (read-only)": "检查 {device}（只读）",298
"Check and repair the file system on {device}": "检查并修复 {device} 上的文件系统",299
"Check the file system on {device} (read-only)": "检查 {device} 上的文件系统（只读）",300
"The SSH account has no sudo rights; disks are shown read-only.": "SSH 账户没有 sudo 权限；磁盘以只读方式显示。",301
"The sudo policy requires a terminal (requiretty); CH-J does not bypass it.": "sudo 策略要求终端（requiretty）；CH-J 不会绕过此要求。",302
"sudo is not installed and the SSH account is not root.": "未安装 sudo，且 SSH 账户不是 root。",303
"The SSH connection was lost. A running disk job continues on the server; its status is checked again after reconnecting.": "SSH 连接已中断。运行中的磁盘任务会继续在服务器执行；重新连接后再次检查状态。",304
"The server did not respond in time.": "服务器未及时响应。",305
"The disk layout changed since the plan was reviewed. Nothing was changed; review the new plan.": "自审核计划后磁盘布局已更改。未作任何更改；请审核新计划。",306
"The plan expired or was already used. Nothing was changed.": "计划已过期或已使用。未作任何更改。",307
"The disk layout changed since planning; the job stopped before changing anything.": "自制定计划后磁盘布局已更改；任务在任何更改前已停止。",308
"Another disk job is running on this server.": "此服务器上有另一个磁盘任务正在运行。",309
"This job was already submitted; its status is shown instead.": "此任务已提交；改为显示其状态。",310
"This device belongs to Proxmox host or guest storage; destructive changes are not offered.": "此设备属于 Proxmox 主机或客户机存储；不提供破坏性更改。",311
"The device is in use (mounted, active swap or used by another layer). CH-J never releases it automatically.": "设备正在使用中（已挂载、活动交换空间或被其他层使用）。CH-J 绝不会自动释放它。",312
"Shrinking needs an unmounted file system.": "缩小需要未挂载的文件系统。",313
"XFS can only be grown while mounted.": "XFS 只能在已挂载时扩大。",314
"Resizing FAT is not implemented.": "尚未实现 FAT 大小调整。",315
"Resizing this LUKS mapping needs its passphrase; CH-J never handles LUKS secrets.": "调整此 LUKS 映射大小需要其密码短语；CH-J 绝不处理 LUKS 机密。",316
"LUKS is never shrunk automatically.": "绝不会自动缩小 LUKS。",317
"A required tool is not installed on the server. CH-J does not install packages.": "服务器未安装所需工具。CH-J 不会安装软件包。",318
"The size is below the safe minimum.": "大小低于安全最小值。",319
"This operation is prepared but not enabled yet.": "此操作已准备，但尚未启用。",320
"The kernel still uses the old partition table. Reboot (or finish in a rescue system) before continuing.": "内核仍使用旧分区表。继续前请重启（或在救援系统中完成）。",321
"This needs root or sudo.": "需要 root 或 sudo。",322
"Disk management is available only for Linux servers.": "磁盘管理仅适用于 Linux 服务器。",323
"The expansion is no longer possible with the current layout.": "当前布局已无法执行扩容。",324
"Disk Manager": "Disk Manager",325
"Close": "关闭",326
"Active SSH session": "当前 SSH 会话",327
"Refresh": "刷新",328
"Load with sudo": "通过 sudo 加载",329
"Jobs on server": "服务器任务",330
"Devices": "设备",331
"Health (SMART)": "健康状况（SMART）",332
"New partition table…": "新建分区表…",333
"Preview of queued changes": "队列更改预览",334
"Partition": "分区",335
"Label / name": "卷标 / 名称",336
"Used": "已用",337
"Unused": "未用",338
"LVM volume groups": "LVM 卷组",339
"Volume group / logical volume": "卷组 / 逻辑卷",340
"Free / data": "空闲 / 数据",341
"Content": "内容",342
"Pending operations": "待处理操作",343
"Review and apply…": "审核并应用…",344
"Undo last": "撤销上一步",345
"Clear queue": "清空队列",346
"Clearing the queue changes nothing on the server.": "清空队列不会更改服务器上的任何内容。",347
"Hide": "隐藏",348
"Detailed log": "详细日志",349
"Restricted capabilities": "受限功能",350
"The plugin has no access to Node.js, local files or the network. It reads disks through disks.read and changes them only through fixed, validated Core operations (disks.manage); there is no generic shell.": "此模块无法访问 Node.js、本地文件或网络。它通过 disks.read 读取磁盘，仅通过固定、已验证的 Core 操作（disks.manage）进行更改；没有通用 shell。",351
"Cancel": "取消",352
"Review planned changes": "审核计划更改",353
"Back without changes": "返回且不作更改",354
"Apply now": "立即应用",355
"sudo required": "需要 sudo",356
"sudo password": "sudo 密码",357
"Keep in memory for this SSH session (needed to monitor running jobs; cleared on disconnect or after 10 minutes of inactivity)": "在此 SSH 会话期间保存在内存中（监控任务所需；断开连接或闲置 10 分钟后清除）",358
"The password is sent to the server only through the SSH channel's stdin and is never stored on disk or logged.": "密码仅通过 SSH 通道的 stdin 发送至服务器，绝不保存在磁盘或日志中。",359
"Continue": "继续",360
"Unknown": "未知",361
"done": "已完成",362
"running": "运行中",363
"failed": "失败",364
"stopped": "已停止",365
"succeeded": "成功",366
"pending-reboot": "等待重启",367
"Session ended. Choose a server.": "会话已结束。请选择服务器。"368
}SHA-256
b16971c54bc2ce4f105828b93da0e3edeb35ff0d68e96167efa525986901d03eCH-J Proprietary Software License 1.14 · Die Quellen werden unter der CH-J Proprietary Software License 1.14 bereitgestellt. Ihre Verfügbarkeit ändert die Lizenzbedingungen nicht und gewährt keine zusätzlichen Rechte.
SHA-256 des Archivs
77380d4805485ffa4027fbe7858b5836f197a4aa9d52358a43e2d12d018744df